High Precision Cooling and Heating Constant Temperature Control Systems

2022/10/31 ClassificaçãoNotícias do sector 144

High Precision Cooling and Heating Constant Temperature Control Systems

The high-precision cooling and heating temperature control machine is to set an electric heating rod in the jacket, and then inject heat transfer oil. When the power is turned on, the electric heating rod generates heat, heats the heat transfer oil, and the heat transfer oil transfers the heat to the inner cylinder.

1. The high-precision high and low temperature temperature controller can continuously adjust the energy to ensure the full performance of the compressor and help users save operating costs to a large extent.

2. Regular inspection, maintenance, and maintenance of high-precision high and low temperature temperature control machines can maximize the performance of the equipment and prolong the service life of the equipment. The prerequisite is standardized operation and regular maintenance.

3. When the high-precision high-low temperature temperature control machine is turned on, check the temperature of the reducer, motor, and base bearings. The temperature cannot exceed 60 °C. Check whether the inlet and outlet valves are in good condition, whether the bolts of the flange and the base are loose, and the safety cover Is it normal.

4. Keep the stirring shaft clean, the rotation direction of the stirring shaft is clockwise, and it is strictly forbidden to reverse.

5. Listen to whether the sound of the reducer and the motor is normal, the oil quality and quantity in the reducer, and add or replace new oil if necessary.

6. Always check the equipment for damage and abnormal vibration.

7. The high-precision high-low temperature temperature control machine should strictly avoid metal or hard objects falling into the kettle when feeding, so as not to damage the equipment.

8. When the high-precision high-low temperature temperature controller uses the jacket, it should be heated slowly and cannot exceed the pressure tolerance range of the reactor.

9. Pay close attention to whether the safety operation indicator is sensitive, whether the safety valve and pressure gauge are properly calibrated, and whether the rupture disk is leaking.

10. Establish a system for the use and maintenance of high-precision high-low temperature temperature control machines, do a good job of equipment use, basic sanitation and cleaning, maintenance records, and ensure the safe and normal use of stainless steel reactors.

11. For the anti-corrosion of the jacket of the high-precision high-low temperature temperature control machine, the jacket of the reactor is polished, derusted and painted with anti-corrosion paint for many times within one inspection cycle to prolong the service life of the equipment.

Nós somos um fabricante profissional de equipamento de controlo de temperatura, apoiando serviços personalizados, por favor consulte-nos para mais pormenores!