Detailed Description

Detailed Description
Simple Parameters
Exhibitions
FAQ

Provides accurate and fast ambient temperature (-120 °C ~ +300 °C) for chips, modules, integrated circuit boards, and electronic components. It is an indispensable instrument for product electrical performance testing, failure analysis, and reliability assessment. Widely used in semiconductor companies, aerospace, optical communications, universities, research institutes and other fields.

Compared to the traditional thermostat, there are several features:
Temperature range: -120 ℃ ~ +300 ℃;
The temperature rise and fall is very fast, -55 ℃ ~ 150 ℃ < 10 seconds;
Temperature control accuracy: ±1 ℃;
Temperature setting capability: ±0.1 ℃;
Temperature display capability: ±0.1 ℃;
Maximum air flow: 25m3/h;
Real-time monitoring of the real temperature of the IC under test to achieve closed-loop feedback and adjust the gas temperature in real time;
The temperature rise and fall time is controllable, programmable operation, manual operation and remote control.

Product parameters (All products can be customized)

Model		AES-A1035W
Temp. Range		-100℃～225℃
Heating Power		4.5kW
Refrigerating Output	-100℃	1.2kW
Temp. Control Accuracy		±1℃
Temp. Conversion Time		-70℃ to 150℃ Approximately 10S 150 ℃to -70℃ Approximately 20s
Air Requirement		Air Cleaner<5um
		Air Oil Content:<0.1ppm
		Air Temp&Humidity：5℃～32℃ 0～50%RH
Air Handing Capacity		7m3/h ～ 25m3/h Pressure 5bar～7.6bar
System Pressure Dispiay		Pressure of Refrigeration system is realized by pressure gauge (High pressure, low pressure);
		Pressure of circulatory system is detected by pressure sensor and displayed on touch screen.
Controller		Siemens PLC, Fuzzy PID Control algorithm.
Temp. Control		Control of outlet temperature
Programmable		10 procedures can be developed, and each program can be composed of 10 steps
Communicating Protocol		Ethernet Interface TCP/IP Protocol.
Internal Temp. Feedback		Equipment outlet temperature, refrigeration system condensation temperature, ambient temperature, compressor suction temperature, cooling water temperature (water cooling equipment is configured) .
Temp. Feedback		T Temperature Sensor
Compression Engine		Italy Duling
Evaporimeter		Double-pipe (heat) Exchanger
Calorifier		Flanged Barrel Heater
Refrigeration Accessory		Danfoss / Emerson fittings (dry filters, oil separators, high and low pressure protectors, expansion valves, solenoid valves).
Operation Panel		LNEYA custom 7-inch color touch screen, temperature curve display\ EXCEL data export.
Safe Guarding		With self-diagnosis function; phase sequence phase breaker, freezer overload protection; high-voltage pressure switch, overload relay, thermal protection device and other safety protection functions.
Cryogen		Topsubmixed Refrigerant
External Insulation Hose		8m DN32 fast coupling clamp for easy outgoing insulation hose
Shape Dimension (Wind)cm		80120185
Shape Size (Water)cm		70100175
Air-Cooled Type		Copper tube aluminum fin condensation mode, upper and out type, condensing fan using Germany EBM axial flow fan.
Water-Cooled Type W		Type W is water cooled
Water-Cooled Condenser		Sleeve type heat exchanger (Paris/ Shen’s)
Cooling Water Quantity At 25℃		2.6m3/h
Source 380V 50HZ		6.8kW max
Source		Customizable 460V 60HZN 220V 60HZ three-phase
Shell Material		Cold rolled sheet spray (Standard Colour 7035).
Temp. Spread		High Temperature To +300℃

Classified Information

Categories: Temp. Cycling Test, Thermal Test & Process Cooling

Detailed parameters

Max Working Temp.	225℃
Min Working Temp.	-100℃
Power	10~20kW
Temp. control mode	None
Temp. Accuracies	±1℃

展会1

LNEYA attends various exhibitions at home and abroad every year. At the exhibition, we show the latest research equipment of LNEYA. Every year, long-term cooperative customers will come to exhibitions and communicate with us. We are also actively developing new customers to provide them with high quality machines and services.

After sale service

Quality assurance

Guarantee that the goods are sold to be conform to the provisions of the contract and qualified new products by factory inspection, quality performance, technical indicators and configured are in accordance with manufactures and technical documents stipulated in the contract.

Installation and debugging

After the arrival of the goods, my company or my company agent is responsible for installation and debugging of equipment need on-site installation and debugging.

Inspection and acceptance

After installation and debugging, acceptance by the customer to confirm the goods to be conform to the provisions of the contract and qualified new products, quality performance, technical indicators and configured are in accordance with manufactures and technical documents stipulated in the contract, and after the confirmation of a full set of technical documents, sign the installation acceptance report and confirm acceptance.

Training

At the same time of installation and debugging of equipment, my company’s after-sales service engineer is responsible for technical training for user until user can be skilled of operation. In the process of using equipment by customer, customer can consult relevant technical issues to after-sales service personal of our company at any time, according to the situation, my company will arrange training on site or remote.