500 Ton Chiller – Industrial Chiller Factory

500 Ton Chiller – Industrial Chiller Factory

The 500 ton chiller is used for liquid rapid refrigeration, the refrigeration temperature is -150 ℃ ~ -5 ℃, widely used in petrochemical, medical, pharmaceutical, biochemical, freeze-drying, biological and other industries, the operation of the 500 ton chiller system is through three interconnected system: refrigerant circulation system, water circulation system, electrical appliance automatic control system, then, how are these three systems closely related?

1. Refrigerant circulation system: the liquid refrigerant in the evaporator absorbs heat in water and evaporates, forming a temperature difference between the refrigerant and water, and the liquid refrigerant is also completely evaporated into a gaseous state, and then sucked and compressed by the compressor, the gaseous refrigerant It absorbs heat through the condenser and condenses into a liquid. After throttling through the expansion valve, it becomes a low-temperature and low-pressure refrigerant and enters the evaporator to complete the refrigerant cycle process.

2. Water circulation system: The water pump is responsible for pumping water from the water tank to the equipment that the user needs to cool. The chilled water will take away the heat and the temperature will rise, and then return to the chilled water tank.

3. Electric appliance automatic control system: including power supply part and automatic control part. The power supply part supplies power to compressors, fans, water pumps, etc. through contactors. The automatic control part includes temperature controller, pressure protection, delay device, relay, overload protection, etc., which are combined to achieve automatic start and stop according to water temperature, protection and other functions.

The 500 ton chiller adopts a single compressor, automatic cascade refrigeration mode, rapid cooling, simple equipment pipeline, low failure rate, each 500 ton chiller is tested in the factory with load for no less than 12 hours, the user only needs to install the pipeline It can be run immediately, and the operation is convenient and simple.

비즈니스를 위한 맞춤형 솔루션

저온 냉각기(수냉식 및 공냉식)

온도 제어 범위: -150°C ~ -5°C

당사는 -150°C의 낮은 온도 제어 범위를 갖춘 저온 냉각기 생산을 전문으로 하며, 다양한 산업의 냉장 요구 사항을 충족할 수 있습니다.

재순환 냉각기 (수냉식 및 공냉식)

온도 제어 범위: -120°C ~ +30°C

당사의 재순환 냉각기는 저온 냉동 기술을 채택하고 온도가 -120℃까지 낮으며 다양한 액세서리를 사용자 정의 할 수 있습니다.

실온 냉각기/소형 냉각기

온도 제어 범위: +5°C ~ +50°C

이 냉각기는 다양한 산업 및 실험실에서 널리 사용될 수 있으며 맞춤형 설계를 지원합니다.

직접 냉각식 냉동 장비

온도 제어 범위: -120°C ~ -10°C

열 교환 면적이 작고 열 교환이 큰 장소에 적합합니다.

직접 냉각식 초저온 냉각기

온도 제어 범위: -150°C ~ -110°C

비즈니스를 위한 맞춤형 솔루션.

스크류 냉각기

저온 스크류 냉각기 및 실온 스크류 냉각기

비즈니스를 위한 맞춤형 솔루션.