How to Install a Chiller?

How to Install a Chiller?

1. The place where the chiller is installed must be the floor, the installation pad or the foundation, and its levelness is within 6.4mm, and it can bear the operating weight of the chiller;

2. Before installation, check whether the machine parts are damaged or the screws are loose, and choose a place with good environmental sanitation and good ventilation for installation;

3. The device is installed in the machine room where the room temperature does not exceed 44°C. There should be sufficient space around and above the unit for daily maintenance of the chiller;

4. Selezionare il tubo dell'acqua con il diametro appropriato, il sistema di raffreddamento e il sistema dell'acqua fredda quando l'apparecchiatura funziona alla massima potenza, e collegarli correttamente.

6. In qualsiasi condizione di carico, il flusso dell'acqua deve rimanere stabile.

6. The planning and installation of all chilled water and cooling water pipelines should be carried out in accordance with conventional methods. Vibration damping pipes should be installed during piping to ensure proper elasticity, and to prevent the water in the evaporator from being drained when the water pump is shut down;

5. Per ridurre il rumore e le vibrazioni, è meglio installare un isolatore di vibrazioni sulla condotta.

8. Analyze water quality to prevent fouling from affecting heat transfer;

9. Please install a filter at the inlet of the water pipe and clean it regularly;

10. After the leak test is over, it is necessary to carry out anti-rust treatment for all connecting ports.