How does the Chiller Manufacturer Debug the Equipment?

2022/09/08 ClassificazioneNotizie sul settore 177

How does the Chiller Manufacturer Debug the Equipment?

Industrial chiller, also known as refrigeration machine, is a large refrigeration equipment that can change the ambient temperature. In the refrigeration industry, there are air-cooled chiller and water-cooled chiller. Many customers are curious about how the chiller manufacturer debugged the industrial chiller that needs maintenance and repair after arriving at the site.

Next, lneya refrigeration will tell you how we conduct on-site commissioning of industrial chillers.

1. Check whether the outside of the equipment host is damaged by collision, and check whether the index of the high and low voltage indicator is normal and whether the equipment leaks fluorine.

2. Check whether the power supply meets the standard, whether it can meet the operation of the equipment, and check whether the circuit is broken and whether the electronic components are damaged.

3. Observe whether the parameters of cooling water pump, chilled water pump and cooling tower match with the main engine of the equipment.

4. Whether the cooling water and chilled water systems are equipped with automatic water replenishment devices, filtration devices and water treatment equipment.

5. Filters larger than 40 shall be installed at the water inlet of condenser and evaporator.

6. Confirm whether the water system is cleaned and check whether the operation of the water system is normal.
The above are some steps for the chiller manufacturer to debug the industrial chiller. If you don’t know, you can contact lneya refrigeration.

Siamo un produttore professionale di apparecchiature di controllo della temperatura, sostenendo servizi personalizzati, si prega di consultateci per i dettagli!