Routine Maintenance of Reactor Refrigeration and Heating System

2022/08/11 ClassificationNouvelles de l'industrie 307

Routine Maintenance of Reactor Refrigeration and Heating System

The reaction kettle refrigeration and heating system is a common temperature control system in the laboratory. Our temperature control system adopts a fully closed cycle temperature control, which will not produce oil mist at high temperature and will not absorb moisture at low temperature. So how can we improve the service life of the system? Next, I will introduce some daily maintenance methods for users’ reference.

1. The setting values of various safety protection devices of our reactor refrigeration and heating system have been set, and users should not change them at will.

2. When the refrigeration and heating system of the reactor is faulty and alarmed and shut down, first press the stop button of the equipment (the alarm light will go out), and then check the cause of the system failure. Do not force the machine to run until the fault is eliminated.

3. It is necessary to keep the refrigeration and heating system of the reactor clean and ventilated, and regularly clean and remove the condenser to ensure the normal operation of the equipment.

4. The cooling and heating system should keep the cooling water tower clean, and keep the air near the water source unobstructed and the temperature low to avoid sundries entering the cooling tower to reduce the cooling efficiency.

5. Please keep the surface of the cooling coil of the low-temperature coolant circulation device clean, ensure that the nearby air is unobstructed, and regularly clean the fouling on the coil to ensure a good heat exchange effect.

The typical applications of our refrigeration and heating systems are: double-layer reactor, micro-channel reactor, high-pressure reactor, small constant temperature control system, double-layer glass reactor, temperature control of steam saturation system, material low temperature and high temperature aging test, combinatorial chemistry , temperature control of semiconductor equipment, vacuum chamber, etc.

Nous sommes un fabricant professionnel d'équipements de contrôle de la température et nous offrons des services personnalisés. nous consulter pour plus de détails !