Stand Alone Chiller System for Process Chilled Water
A chiller is a cooling device that can provide constant temperature, constant flow, and constant pressure. It can also be called a constant temperature chiller. The principle of the chiller is to inject a certain amount of water into the internal water tank of the machine, cool the water through the chiller refrigeration system, and then the water pump inside the machine injects low-temperature frozen water into the equipment that needs to be cooled, and the chilled water transfers the heat inside the machine Take it away, and return the high-temperature hot water to the water tank again to cool down, so that the cooling is circulated and exchanged to achieve the effect of cooling the equipment.
◆Excellent performance
1. The main engine adopts the international advanced semi-hermetic screw rotor compressor, and the motor and compressor adopt an integrated design without shaft seal leakage, which is 20%-30% higher in energy efficiency than ordinary compressors;
2. Two compressors or multiple compressors have a start-up and stop cycle control program, which can balance the load and prolong the service life of the unit;
3. Two compressors or more units adopt multiple refrigeration circuits. When one of the circuits needs to be repaired and maintained, the other circuits can still operate normally and have a backup function;
4. The compressor is started by unloading and step-down to avoid impact on the power grid.
5. The chilled water outlet temperature of the chiller can be controlled above 5°C;
6. The unit can be equipped with an environmentally friendly and energy-saving heat recovery device as needed, which can produce free hot water during cooling.
◆Easy to install
1. The chiller unit has a compact structure and a small footprint, saving space in the machine room;
2. When the whole machine leaves the factory, it has been strictly debugged and fixed to complete, and it has fully reached the design state;
3. The vibration of the unit is very little, the foundation does not need special vibration isolation measures, and the installation is simple;
4. Only need to connect the evaporator chilled water and condenser cooling water pipes during installation.
5. The chiller unit can carry out intelligent program control according to the load change: 100%, 75%, 50%, 25% (or start), 0, saving energy consumption;
◆Complete security protection functions
1. Pressure protection: high-pressure and low-pressure automatic protection device for the refrigeration system of the chiller;
2. Power supply protection: undervoltage protection, phase loss protection, reverse phase protection, overload protection, motor overheat protection;
3. Antifreeze protection: when the chilled water temperature is too low, the unit will automatically stop;
4. Safety valve protection: When the refrigerant pressure exceeds a certain value, the safety exhaust valve will automatically open;
5. Delay protection: Delay start protection of the chiller compressor to prevent the compressor from starting frequently;
6. Water flow protection: When the water flow stops or drops, continuing to run will endanger the equipment, and the equipment will automatically shut down.
Refroidisseurs basse température (refroidis par eau et par air)
Plage de contrôle de la température : -150°C à -5°C
Application : Réacteurs divers, systèmes de distillation ou d'extraction, laboratoires, instituts de recherche, industries chimique, pharmaceutique, pétrochimique, biochimique, médicale, hospitalière, ateliers de R&D, tests de semi-conducteurs, aérospatiale, biologique et autres.
Plage de température | Série -25°C ~ -5°C | Série -45°C ~ -10°C | Série -60°C ~ -10°C | Série -80°C ~ -30°C | Série -110°C ~ -50°C |
Capacité de refroidissement | jusqu'à 360 kW | jusqu'à 360 kW | jusqu'à 360 kW | jusqu'à 270 kW | jusqu'à 180 kW |
Circulateurs réfrigérés (Refroidissement par eau et par air)
Plage de contrôle de la température : -120°C à +30°C
Application : Réacteurs divers, systèmes de distillation ou d'extraction, laboratoires, instituts de recherche, industries chimique, pharmaceutique, pétrochimique, biochimique, médicale, hospitalière, ateliers de R&D, tests de semi-conducteurs, aérospatiale, biologique et autres.
Plage de température | Série -25°C ~ +30°C | Série -45°C ~ +30°C | Série -60°C ~ -20°C | Série -80°C ~ -20°C | Série -120°C ~ -70°C |
Capacité de refroidissement | jusqu'à 38 kW | jusqu'à 12 kW | jusqu'à 7,2 kW | jusqu'à 7,2 kW | jusqu'à 8,6 kW |
Refroidisseurs à température ambiante / Petits refroidisseurs
Plage de contrôle de la température : +5°C à +50°C
Application : Réacteurs divers, systèmes de distillation ou d'extraction, laboratoires, instituts de recherche, industries chimique, pharmaceutique, pétrochimique, biochimique, médicale, hospitalière, ateliers de R&D, tests de semi-conducteurs, aérospatiale, biologique et autres.
Plage de température | -18°C ~ +30°C | Série +5°C ~ +35°C |
Capacité de refroidissement | jusqu'à 0,9 kW | jusqu'à 50 kW |