Water Cooled Process Chiller

Water Cooled Process Chiller

The air-cooled chiller will inevitably generate a lot of heat during efficient operation. The air-cooled chiller uses air-cooled cooling. If it is affected by the ventilation environment, the overall cooling effect will be worse. Under poor ventilation conditions, there is no way to compare with water cooled process chiller in terms of cooling performance or durability of low temperature environment.

The water cooled process chiller will also generate high heat during operation. If it is not removed effectively in time, it will inevitably affect the operating efficiency of the chiller. Therefore, we use the connection cooling tower to improve the operating efficiency of the water cooled process chiller.

When installing a cooling water tower for a water cooled process chiller, location selection is particularly important. The cooling water tower must be installed outdoors and on the roof. Installing on the roof can increase the speed of water flow, which is very helpful for cooling. If the cooling water tower is installed at the same position as the water cooled process chiller, its water flow rate will be low, which will make the heat dissipation effect of the cooling water tower poor, and will also make the water pump run in an overloaded state, thereby reducing the service life of the water pump.

A well-selected cooling tower can maintain the safe operation of the water cooled process chiller. The cooling water tower operates in an efficient state, which can not only improve the cooling effect of the water cooled process chiller, but also speed up the cooling speed and improve the production capacity of the enterprise.

비즈니스를 위한 맞춤형 솔루션

저온 냉각기(수냉식 및 공냉식)

온도 제어 범위: -150°C ~ -5°C

당사는 -150°C의 낮은 온도 제어 범위를 갖춘 저온 냉각기 생산을 전문으로 하며, 다양한 산업의 냉장 요구 사항을 충족할 수 있습니다.

재순환 냉각기 (수냉식 및 공냉식)

온도 제어 범위: -120°C ~ +30°C

당사의 재순환 냉각기는 저온 냉동 기술을 채택하고 온도가 -120℃까지 낮으며 다양한 액세서리를 사용자 정의 할 수 있습니다.

실온 냉각기/소형 냉각기

온도 제어 범위: +5°C ~ +50°C

이 냉각기는 다양한 산업 및 실험실에서 널리 사용될 수 있으며 맞춤형 설계를 지원합니다.

직접 냉각식 냉동 장비

온도 제어 범위: -120°C ~ -10°C

열 교환 면적이 작고 열 교환이 큰 장소에 적합합니다.

직접 냉각식 초저온 냉각기

온도 제어 범위: -150°C ~ -110°C

비즈니스를 위한 맞춤형 솔루션.

스크류 냉각기

저온 스크류 냉각기 및 실온 스크류 냉각기

비즈니스를 위한 맞춤형 솔루션.