Precautions for Low Temperature Water Cooled Chiller

There are many models of industrial low-temperature water cooled chillers at -35 ℃. Users should pay attention to the installation precautions and use precautions when using the equipment to avoid problems caused by improper use of industrial low-temperature water cooled chillers.

Installation precautions:

1. For the installation position of -35 ℃ industrial low-temperature water-cooled chiller, the ground foundation shall be laid before installation to ensure that the ground is flat.
2. The parameter configuration of different models of -35 ℃ industrial low-temperature watercooledchillers is different, and the caliber of each hose is also different. It needs to be purchased and installed according to the size requirements.
3. When the industrial low-temperature water-cooled chiller is loaded at -35 ℃, the water output of the chiller should be kept stable.
4. For the installation of -35 ℃ industrial low-temperature water-cooled chiller, the position of circulating pump shall be aligned according to the manual to ensure the air supply effect of generator.
5. It is recommended to install it in a place with good water quality to avoid scaling caused by water quality problems and affecting heat transfer.

Precautions for use:

1. During the operation of -35 ℃ industrial low-temperature water-cooled chiller, pay attention to the data of suction, exhaust, oil pressure and oil temperature, and check the accuracy of each instrument.
2. If the equipment is shut down due to the protection device during operation, the operator shall check the corresponding fault causes before starting the equipment.
3. If the shutdown is caused by a sudden power failure, it is necessary to pay attention to whether it is reversed, and shut down as soon as possible.
4. If the industrial low-temperature water-cooled chiller at -35 ℃ is shut down for a long time, it is recommended to drain all the water in the equipment to avoid freezing the equipment in a supercooled environment.
5. If the equipment is started in the season with low temperature, it is recommended to start the oil pump first and circulate the oil in the equipment for a period of time. It is recommended to start it manually.

The smooth operation of -35 ℃ industrial low-temperature water chiller is closely related to the operator’s understanding of the precautions for the use of the equipment. Therefore, it is recommended to have a little understanding of the use of the chiller.
견적 요청하기