Influence of Excessive Exhaust Temperature on Low-Temperature Chiller during Operation

Influence of Excessive Exhaust Temperature on Low-Temperature Chiller during Operation

We know that the discharge temperature is an important parameter in the operation of the refrigeration compressor and must be strictly controlled. If the exhaust temperature is too high, it will cause overheating of the special refrigeration compressor for the chiller. Next, we describe the effect of high exhaust temperature on industrial chillers during operation.​

1. If the exhaust temperature of the compressor is too high, the gas transmission coefficient will directly decrease and the shaft power will increase. Moreover, the reduction of the viscosity of the lubricating oil will cause abnormal wear of the cylinder, bearing and piston ring, and even cause the accident of burning the bearing bush and the cylinder pulling.​

2. Once the exhaust temperature of the compressor is too high, it will directly lead to thermal decomposition of the refrigerant and lubricating oil under the catalysis of metal, and will generate acid substances, free carbon and moisture that are harmful to the compressor. If free carbon is deposited on the exhaust valve, it will not only destroy its tightness, but also increase the flow resistance. If the exfoliated carbon residue is carried out of the compressor, it will block the capillary and the dryer. Acids will corrode the components and electrical insulating materials of the chiller refrigeration system. Moisture can clog the capillaries.​

3. 작업자는 컴프레서의 과열을 확인해야 합니다. 과열이 심각한 경우 피스톤이 과도하게 팽창하여 실린더에 끼게 되고 밀폐형 컴프레서의 내장 모터가 소손될 수 있습니다.

4. The high exhaust temperature of the compressor will directly affect its service life, because the chemical reaction speed increases with the increase of temperature. In general, when the temperature of electrical insulating materials rises by 10°C, its lifespan is reduced by half. This is especially important for hermetic compressors.​

In a word, we talk about the influence of high exhaust temperature on industrial chillers during operation. We have the above content, we need to analyze and summarize deeply. We must limit the discharge temperature of the special refrigeration compressor for chillers, so as to better promote the development of the industry.

우리는 온도 제어 장비의 전문 제조업체로 맞춤형 서비스를 지원합니다. 문의하기 자세한 내용을 확인하세요!

워터 칠러

온도 제어 범위: -150°C ~ +50°C

동적 온도 제어 시스템

온도 제어 범위: -120°C ~ +350°C

자동차 테스트 냉각기

온도 제어 범위: -40°C ~ +100°C

반도체 테스트 냉각기

온도 제어 범위: -85°C ~ +250°C

산업용 냉장고

온도 제어 범위: -150°C ~ -10°C