How to Reduce Vibration and Noise of Industrial Chiller

In the production and manufacturing activities of the company, we often encounter the situation that the noise caused by the industrial cold water machine cooling compressor exceeds all normal norms. Although according to the scientific research on the noise and vibration of the industrial cold water machine cooling compressor all over the world, the identification of noise sources, the spread of noise and vibration, the characteristics of noise and vibration There is little scientific research on noise and vibration control. At this stage, a set of detailed basic ideas and product R & D management system have not been produced. Generally, it is the root of using noise detection system software to identify vibration and noise sources, so as to adopt shock absorption and noise reduction countermeasures. The following countermeasures can also help everyone master and deal with the maintenance problems of 물 냉각기 on the whole.

1. The dynamic balance method of compressor rotor of industrial chiller is used to reduce DC vibration.

2. Calibrate the parallelism between the motor shaft of the industrial chiller and the main shaft bearing of the compressor.

3. Remove and replace the soft coupling in different ways to reduce the noise of industrial chiller.

4. Tighten parts, improve installation clearance, reduce rolling bearing vibration and reduce equipment noise.

In view of the abnormal operation noise, the key causes are the loosening of the tightening anchor bolts of the compressor, the poor alignment of the coupling between the compressor and the motor, and the poor operation of the motor rotor. According to the inspection, tighten the anchor bolts to the standard value, adjust the alignment of the coupling, remove and replace the worn parts, adjust all kinds of installation gaps within the standard value, and the operation sound of the industrial chiller is normal.

비즈니스를 위한 맞춤형 솔루션

저온 냉각기(수냉식 및 공냉식)

온도 제어 범위: -150°C ~ -5°C

당사는 -150°C의 낮은 온도 제어 범위를 갖춘 저온 냉각기 생산을 전문으로 하며, 다양한 산업의 냉장 요구 사항을 충족할 수 있습니다.

재순환 냉각기 (수냉식 및 공냉식)

온도 제어 범위: -120°C ~ +30°C

당사의 재순환 냉각기는 저온 냉동 기술을 채택하고 온도가 -120℃까지 낮으며 다양한 액세서리를 사용자 정의 할 수 있습니다.

실온 냉각기/소형 냉각기

온도 제어 범위: +5°C ~ +50°C

이 냉각기는 다양한 산업 및 실험실에서 널리 사용될 수 있으며 맞춤형 설계를 지원합니다.

직접 냉각식 냉동 장비

온도 제어 범위: -120°C ~ -10°C

열 교환 면적이 작고 열 교환이 큰 장소에 적합합니다.

직접 냉각식 초저온 냉각기

온도 제어 범위: -150°C ~ -110°C

비즈니스를 위한 맞춤형 솔루션.

스크류 냉각기

저온 스크류 냉각기 및 실온 스크류 냉각기

비즈니스를 위한 맞춤형 솔루션.