Chiller 15 kw – Compressor Water Chiller
As the core component of the 15 kw chiller, the compressor plays a very important role. However, during the operation, the vibration and noise generated by the compressor are not uncommon. So what are the reasons for the vibration and noise of the compressor? ? The following will help you understand these problems and solutions.
Causes of compressor vibration and loud noise:
1. Check the pipeline connection
If the 15 kw chiller is poorly connected to the pipeline, or the pipeline is not installed as required, then the chiller will vibrate and make too much noise when it is running, so we must fix it or install the pipeline and equipment as required. If If there are special needs, please install a shock absorber.
2. Parts are damaged
If the internal components are damaged, first shut down the chiller, check the damaged parts, and replace the damaged parts in time. If the damage is serious, please contact the chiller manufacturer and ask professionals to check and replace them in time.
3. Loose screws
When the 15 kw chiller is running for too long, the anchor screws may become loose, which will cause vibration and noise. We just need to tighten the loose screws or replace with new anchor screws.
4. The exhaust valve is damaged
When the exhaust valve is damaged, the 15 kw chiller is bound to be affected. We should check the damage of the exhaust valve and replace it with a new one in time.
5. The compressor is short of oil and overloaded
The 15 kw chiller will be affected by the lack of oil or overload of the compressor. Check the lack of oil or overload in time, supplement with the same brand and model of oil, and check the overload of the compressor at the same time, and deal with it.
6. Refrigerant enters the compressor
Check whether the expansion valve is opened too large. If it is too large, please reduce the opening degree in time, and then check whether too much refrigerant enters the compressor. If it exceeds the specified range, remove the excess refrigerant in time and clean it into the compressor. Refrigerant in the compressor.
저온 냉각기(수냉식 및 공냉식)
온도 제어 범위: -150°C ~ -5°C
당사는 -150°C의 낮은 온도 제어 범위를 갖춘 저온 냉각기 생산을 전문으로 하며, 다양한 산업의 냉장 요구 사항을 충족할 수 있습니다.
온도 범위 | -25°C ~ -5°C 시리즈 | -45°C ~ -10°C 시리즈 | -60°C ~ -10°C 시리즈 | -80°C ~ -30°C 시리즈 | -110°C ~ -50°C 시리즈 |
냉각 용량 | 최대 360kW | 최대 360kW | 최대 360kW | 최대 270kW | 최대 180kW |
재순환 냉각기 (수냉식 및 공냉식)
온도 제어 범위: -120°C ~ +30°C
당사의 재순환 냉각기는 저온 냉동 기술을 채택하고 온도가 -120℃까지 낮으며 다양한 액세서리를 사용자 정의 할 수 있습니다.
온도 범위 | -25°C ~ +30°C 시리즈 | -45°C ~ +30°C 시리즈 | -60°C ~ -20°C 시리즈 | -80°C ~ -20°C 시리즈 | -120°C ~ -70°C 시리즈 |
냉각 용량 | 최대 38kW | 최대 12kW | 최대 7.2kW | 최대 7.2kW | 최대 8.6kW |
실온 냉각기/소형 냉각기
온도 제어 범위: +5°C ~ +50°C
이 냉각기는 다양한 산업 및 실험실에서 널리 사용될 수 있으며 맞춤형 설계를 지원합니다.
온도 범위 | -18°C ~ +30°C | +5°C ~ +35°C 시리즈 |
냉각 용량 | 최대 0.9kW | 최대 50kW |
직접 냉각식 냉동 장비
온도 제어 범위: -120°C ~ -10°C
열 교환 면적이 작고 열 교환이 큰 장소에 적합합니다.
온도 범위 | -40°C ~ -10°C | -80°C ~ -35°C | -120°C ~ -90°C |
압축기 전력 | 최대 8HP | 최대 8HP*2 | 최대 45HP*3 |
직접 냉각식 초저온 냉각기
온도 제어 범위: -150°C ~ -110°C
비즈니스를 위한 맞춤형 솔루션.
온도 범위 | -150°C ~ -110°C |
냉각 용량 | 최대 11kW |
스크류 냉각기
저온 스크류 냉각기 및 실온 스크류 냉각기
비즈니스를 위한 맞춤형 솔루션.
온도 범위 | +5°C ~ +30°C | +5°C ~ +30°C | +5°C ~ +30°C | +5°C ~ +30°C | -25°C ~ +5°C | -25°C ~ +5°C |
냉각 용량 | 최대 1027kW(단일 컴프레서) | 최대 2134kW(듀얼 컴프레서) | 최대 934kW(단일 컴프레서) | 최대 1940kW(듀얼 컴프레서) | 최대 467kW(단일 컴프레서) | 최대 497kW(단일 컴프레서) |