Technical Parameters:
1. Heat medium: saturated steam pressure: 0.5MPa and above, temperature: 158.8 ℃ and above
2. Hot water control temperature RT + 10 ℃ ~ 135 ℃
3. The process water is circularly heated by using the pipe type steam and water mixed heat exchanger;
4. The steam shall have low noise, no vibration and high thermal efficiency in the use of heat exchange process;
5. The service life of steam and water mixed heat exchanger is more than 15 years, so as to achieve once and for all;
6. The temperature of process hot water is constant without manual duty and fully automatic control.
Model |
ST-25W |
ST-38W |
ST-60W |
ST-100W |
ST-200W |
ST-300W |
Steam pressure |
4~6bar |
Hot water temperature range |
RT+10℃~135℃ |
Temperature control accuracy |
±1℃ |
±1℃ |
±1℃ |
±1℃ |
±1℃ |
±1℃ |
Heat exchange capacity max |
25kw |
38kw |
60kw |
100kw |
200kw |
300kw |
Steam interface |
DN20 PN10 |
DN20 PN10 |
DN20 PN10 |
DN25 PN10 |
DN32 PN10 |
DN40 PN10 |
Pump flow |
110L/min
2.5bar |
200L/min
2.5bar max |
200L/min
2.5bar max |
250L/min
2.5bar max |
400L/min
2.5bar max |
600L/min 2.5bar max |
Hot water import and export |
DN25 PN10 |
DN32 PN10 |
DN40 PN10 |
DN50 PN10 |
DN80 PN10 |
DN80 PN10 |
Drain port size |
DN25 PN10 |
DN32 PN10 |
DN40 PN10 |
DN50 PN10 |
DN50 PN10 |
DN80 PN10 |
Control System |
PLC controller |
Display and input |
7-inch color touch screen,Temperature curve display, recording |
Steam flow control |
Through proportional control valve,4~20mA signal adjustment opening size |
power supply 380V50HZ |
1.8kw |
2.5kw |
2.5kw |
4kw |
5.5kw |
7.5kw |
Dimensions cm |
70*80*175 |
70*80*175 |
100*95*175 |
125*100*200 |
150*125*205 |
205*145*205 |
Case material |
Cold-rolled sheet spraying (standard color 7035) |
Copyright information belongs to lneya-online.com, please contact email for details: lilia@lneya.com
Or scan the WhatsApp or WeChat QR code below to contact us.
WhatsAPP WeChat
