LNEYA
Temperature Control Device – Heater and Chiller Unit
The temperature control device is a device that integrates cooling and heating, and can realize the functions of cooling and heating at the same time. It usually consists of compressor, evaporator, condenser, expansion valve, controller, etc. When working, the low-temperature and low-pressure refrigerant is sucked in by the compressor, and after being compressed, it becomes a high-temperature and high-pressure gas, and then dissipates heat through the condenser to turn the refrigerant into a liquid. Then, the liquid refrigerant enters the evaporator through the expansion valve, absorbs the heat in the air in the evaporator, turns into a low-temperature and low-pressure gas, and is sucked into the compressor again for recycling.
| Heater Chiller Combo | ||||
| Model | Cooling Capacity | Heating Capacity | Circulating Pump | Power |
| kW | kW | L/min | kW | |
| SUNDI -10 ~ +150℃ series | 1.5 ~ 15 | 2.5 ~ 15 | 20 ~ 75 | 3.6 ~ 20 |
| SUNDI -25 ~ +200℃ series | 1 ~ 200 | 2.5 ~ 200 | 20 ~ 600 | 4 ~ 260 |
| SUNDI -25 ~ +300℃ series | 1 ~ 200 | 2.5 ~ 200 | 20 ~ 600 | 4 ~ 260 |
| SUNDI -45 ~ +250℃ series | 0.45 ~ 200 | 3.5 ~ 200 | 35 ~ 600 | 6.5 ~ 280 |
| SUNDI -45 ~ +300℃ series | 0.9 ~ 25 | 5.5 ~ 25 | 35 ~ 150 | 9.5 ~ 38 |
| SUNDI -60 ~ +250℃ series | 0.25 ~ 60 | 2.5 ~ 60 | 20 ~ 250 | 5 ~ 95 |
| SUNDI -60 ~ +300℃ series | 0.75 ~ 25 | 5.5 ~ 25 | 35 ~ 150 | 10 ~ 40 |
| SUNDI -70 ~ +250℃ series | 0.4 ~ 15 | 2.5 ~ 15 | 20 ~ 110 | 5.2 ~ 28 |
| SUNDI -80 ~ +250℃ series | 0.3 ~ 80 | 3 ~ 80 | 20 ~ 400 | 7.5 ~ 150 |
| SUNDI -90 ~ +250℃ series | 0.2 ~ 80 | 3 ~ 80 | 20 ~ 400 | 8 ~ 170 |
| SUNDI -100 ~ +100℃ series | 0.45 ~ 80 | 3.5 ~ 80 | 35 ~ 400 | 12 ~ 200 |
| SUNDI -25 ~ +200℃ One machine for two reactors |
1*2 ~ 10*2 | 2.5*2 ~ 10*2 | 20*2 ~ 50*2 | 7.5 ~ 31 |
| SUNDI -40 ~ +200℃ One machine for two reactors |
0.45*2 ~ 10*2 | 2.5*2 ~ 10*2 | 20*2 ~ 60*2 | 8 ~ 33 |
| Recirculating Heater/Chiller | ||||
| Model | Cooling Capacity | Heating Capacity | Circulating Pump | Power |
| kW | kW | L/min | kW | |
| HR -25 ~ +200℃ series | 1 ~ 15 | 2.5 ~ 15 | 20 ~ 110 | 4 ~ 21 |
| HRT -45 ~ +250℃ series | 0.25 ~ 15 | 2.5 ~ 15 | 20 ~ 110 | 4.5 ~ 25 |
