The temperature control range of the ultra-low temperature freezer is -150 degrees to -10 degrees, which can improve the performance of various materials and is used in industrial cold processing, mainly reflected in cold work mold steel and high speed steel, bearing steel, cold work mold and mold accessories; It should not be used for biological cold treatment.
The product has a wide range of application markets and prospects in the industrial field, and a wide temperature control range is even more suitable for a variety of use environments and needs.
Product parameters (All products can be customized)
|Designed bearing capacity is two times of the standard one, (refrigeration system is designed according to the standard capacity when target artifact weight is greater than the standard capacity, the cooling rate will decrease)|
|Temp. range||-80°C~-10°C Optional -80°C～60°C|
|Cooling capacity at -75℃||2.5kW|
|Nickel-chromium alloy electric heating heater, the controller has double safety protection, with independent temperature limiter protection.|
|Cooling rate||(ambient temperature of 25 degrees, no-load, from 60 degrees to -75 degrees about 1 hour).；cooling rate will be a little different for temperature changes.|
|Controller||ASET multifunctional controller|
|Operation panel||7-inch color touch screen, display set temperature, measured temperature.|
|Temp. record||Temperature curve and fault record, U-disk data export, excel format.|
|Inside circulating air||2750 m³/h|
|When it is open, the internal circulation fan automatically turns off. The touchscreen displays open state.|
|Intermediate heat exchanger||KAORI Plate heat exchanger|
|Expansion valve||Electronic expansion valve|
|Evaporator||Copper-tube with aluminum-fin|
|Cooling Type||Air-cooled with water-cooled auxiliary functions (Ensure good cooling capacity when temp. above 30 degrees)|
|Means of insulation||Polyurethane foam insulation, thermal insulation layer 125 mm, with embedded FIR boards|
|Safety Protection||Self-diagnosis function; Phase sequence phase failure protection; leakage protector; cooling unit overload protection; high and low pressure switch, overload relay, thermal protection device, high temperature protection and temperature fault protection.|
|Case material||Outside is cold rolled steel painting, internal is SUS304 wire drawing board.|
|Power 380V 50HZ||15kW MAX|
|Optional||High temperature reaches 150degree and temperature accuracy is ±0.5degree；the input power will be changed（When select this model, the thickness of thermal insulation layer will be 150mm，thermal insulation material will be silicate and vacuum plate）|
|Optional||Closed circulating oil heating system, no direct electric heating element inside the box, suitable for flammable products test|
|Optional||Temp. accuracy ±0.5℃|
|Optional||Cooling and heating program controlled, meet cold treatment process requirements(can set 5 programs, each program can edit 45 steps.)|
|Optional||Interior door, reduce cooling capacity lost when picking small workpieces (temperature below 60 degrees optional)|
|Optional||Outside SUS304 wire drawing board case|
|Optional||Diameter 50mm cable hole|
|Optional||Electric heating vacuum glass observation window (with lighting) 200mm*300mm|
|Optional||Low temperature automatic defrost (can be once per hour or use manual button to defrost), ensure it can work at low temperature for long time even the door is open and close frequently）|
LNEYA attends various exhibitions at home and abroad every year. At the exhibition, we show the latest research equipment of LNEYA. Every year, long-term cooperative customers will come to exhibitions and communicate with us. We are also actively developing new customers to provide them with high quality machines and services.
After sale service
Guarantee that the goods are sold to be conform to the provisions of the contract and qualified new products by factory inspection, quality performance, technical indicators and configured are in accordance with manufactures and technical documents stipulated in the contract.
Installation and debugging
After the arrival of the goods, my company or my company agent is responsible for installation and debugging of equipment need on-site installation and debugging.
Inspection and acceptance
After installation and debugging, acceptance by the customer to confirm the goods to be conform to the provisions of the contract and qualified new products, quality performance, technical indicators and configured are in accordance with manufactures and technical documents stipulated in the contract, and after the confirmation of a full set of technical documents, sign the installation acceptance report and confirm acceptance.
At the same time of installation and debugging of equipment, my company’s after-sales service engineer is responsible for technical training for user until user can be skilled of operation. In the process of using equipment by customer, customer can consult relevant technical issues to after-sales service personal of our company at any time, according to the situation, my company will arrange training on site or remote.
After sale service commitment
A full free one year warranty since the date of acceptance, during the warranty period, all repairs and spare parts are free of charge(instrukent malfunction caused bu human factors will be charged of cost price of spare parts); After the warranty period, we will be responsible for maintenance of equipment for lifetime, according to the actual maintenance fees, appropriate fee will be charged.
(PS:There will have extra charge if the customer need on-site service. And customers need to describe the issue first and then send some failed pics or videos in advance, then Lneya judge if it is possible to go for after-Sales on site. )