Heater Chiller Circulator

Heater Chiller Circulator

Heater Chiller Circulator refers to a circulation device that provides heat and cold sources for reactors, tanks, etc., and is a laboratory instrument with dual functions of heating and cooling. It can be used with experimental instruments (glass reactor, rotary evaporator, fermenter, calorimeter), and can automatically heat or cool according to the set requirements. It has precise temperature control, universal heating and cooling functions, and can meet the needs of various biochemical experiments. need.

Heater Chiller Circulator has the following characteristics

1. Adopting a closed circulation system, the heat transfer fluid is not easy to volatilize and oxidize at high temperature, and no oil mist is generated. Less susceptible to environmental conditions at low temperatures, prolonging the service life of the heat transfer fluid.

2. Heating/refrigeration: When the temperature drops from high temperature to low temperature, it can directly start the refrigeration, work continuously and control the temperature, speed up the progress of the experiment, save resources and improve work efficiency.

3. The refrigeration heat exchanger adopts a full-fiber welded plate heat exchanger, which occupies a small space and has high heat exchange efficiency.

4. The circulation pump adopts high temperature resistant oil pump, which has the advantages of high temperature resistance, low noise and large flow.

5. Various protection functions such as high temperature protection, leakage protection, and overcurrent protection fully guarantee the safety of users and equipment.

6. Beautiful appearance, small size and reasonable structure.

7. According to the needs of users, two pre-cooling methods, air-cooled and water-cooled, can be provided.

What preparations do I need to make before using the Heater Chiller Circulator?

1. The location of the equipment. Heater Chiller Circulator models vary in size, so the laboratory needs to reserve a corresponding location according to the size of the appearance. It is recommended to place it on a stable ground without too much slope. There are wheels under the equipment to move, and then fix the wheels of the equipment. . Corresponding aisles or spaces are reserved around the equipment, and the ground is clean and non-slip, so that operators can add liquid or perform other operations.

2. Application environment. The Heater Chiller Circulator is not suitable for placing outdoors. Although the equipment is fully airtight, the appearance and performance of the equipment will be damaged by wind, rain, and sun. It is recommended to install it in an environment with a suitable indoor temperature. The Heater Chiller Circulator needs to be kept away from dangerous objects and liquids. . The temperature environment of the Heater Chiller Circulator requires room temperature, not too low temperature, and it is not suitable for high temperature and high humidity. It is recommended to leave a gap of more than 30 cm around the device.

3. Equipment power supply. Heater Chiller Circulator is wired according to the manual, pay attention to the power wiring of each electrical part, refer to the power supply power of the instruction manual, and select the appropriate wiring connection. After the equipment is connected and powered on, it cannot be disassembled privately, otherwise it will cause the corresponding equipment to malfunction, and in severe cases, the equipment will be damaged.

4. Equipment debugging. The Heater Chiller Circulator needs to be debugged before it runs in the laboratory, which requires operators who understand the performance of the equipment to do the debugging. The commissioning personnel of the Heater Chiller Circulator need to first check whether the configuration of the equipment and whether the installation, foundation, and pipeline connections meet the requirements. Check whether the power connection is reasonable, and test the pipeline after power on to see if it meets the experimental requirements.

We are a professional manufacturer of temperature control equipment, supporting customized services, please consult us for details!